Real-time Gas Monitoring

Ethylene Oxide Gas Alarm System

All Kem EtO gas alarms:

• Detect leaks and spills of all EO mixtures
• 24 hour surveillance system
• Audible and visual alerts
• Easily mounts on the wall
• Assembled in USA

VAPOR-TRAK EO Gas Alarm Monitor
  #9000-20 20ppm alarm
  #9000-50 50ppm alarm
 
 

 

Remote Alarm System/Annunciator :

• Up to four alarms located in different areas can be monitored from one central location
• Audible and visual alerts
• Easily mounts on the wall
• Assembled in USA

VAPOR-TRAK EO Gas Alarm System
 #9000S-1 (includes 1-annunciator & 1 alarm)
 #9000S-2 (includes 1-annunciator & 2 alarms)
 #9000S-3 (includes 1-annunciator & 3 alarms)
 #9000S-4 (includes 1-annunciator & 4 alarms)
 

   #9000SA  Additional Annunciator
   #9000R-20  Additional 20ppm alarm w/remote support
   #9000R-50  Additional 50ppm alarm w/remote support

Alarm Calibration Kits

To ensure proper maintenance of the
EO alarm each alarm unit should be calibrated
every three (3) months.

Calibration Kits Include:

• Cylinder of non-toxic calibration gas
• Regulator/flow-meter/sensor-cover tool
• Screwdriver
• Convenient carrying case.

   #9010 EO Alarm Calibration Kit for 20ppm alarms
   #9010G Refill calibration gas cylinder only for 20ppm alarms

   #9011 EO Alarm Calibration Kit for 50ppm alarms
   #9011G Refill calibration gas cylinder only for 50ppm alarms

MSDS for #9010 & #9011 calibration gas cylinders

General information about alarms:

• Alarms are available in both 20ppm and 50ppm,
  the different alarms can be hooked up to the same annunciator.
• If you already own a stand-alone alarm,
  it can be upgraded to work with the annunciator.
  (E-mail or call (800) 875-9028 or (954) 733-7499 for alarm information.)
• Alarms can be added to the annunciator any time, up to four (4) total.
• Alarms are available with an optional delay switch,
  this will momentarily silence the audible signal, the red light remains on.
  
• The delay switch can be added to alarms after sale.
  (E-mail or call (800) 875-9028 or (954) 733-7499 for alarm information.)

Top

---

EtO Gas Leak Tester Accessories

 

#9013 - Calibration Kit (w/gas cylinder, calibration tools & directions)

#9013G - Calibration gas cylinder (only)

MSDS for Leak Tester - calibration gas cylinder

Top

---

Glutaraldehyde Tester

Kem Glutaraldemeter

Easy to use, hand-held monitoring device, with a digital display. It measures exposure undetected by both badges and sample pumps and records instantaneous readings down to 0.03 PPM.

 

 

 

 

 

#9150 - Kem Glutaraldemeter kit includes

• Kem Glutaraldemeter (battery included)
• Field formaldehyde calibration standard
• Thermometer
• Phenol filters
• Manual
• Certificate of calibration.

#9151 - Calibration kit only

#9152 - Phenol Filters 100/bx

Top

---

Formaldehyde Tester

The Formaldemeter 400 is a battery operated hand held unit that is simple to use. Push one button and in 10 seconds the formaldehyde level is displayed.

The standard detection range of the instrument is 0.05–10ppm HCHO.

The Formaldemeter 400 software can be modified to measure high formaldehyde concentrations, up to 100ppm HCHO.

 

#9140 - Formaldemeter 400 kit includes

• Formaldemeter 400 (battery included)
• Field formaldehyde calibration standard
• Thermometer 
• Phenol filters
• Manual
• Certificate of calibration.

#9141 - Calibration kit only

#9152 - Phenol Filters 100/bx

Top